Page 40 - Demo

ISCARSQUARE SHOULDER ENDMILLS38LFDCONMSTHSZMSOALDCAPMXDRVSRd%u00b0Designation DC APMX CICT(1) LF DCONMS THSZMS OAL DRVS(2) RMPX%u00b0(3) TQ_3(4) CSP(5) kgH690 EWN D20-3-MMT12-R04 20.00 4.00 3 20.00 18.30 T12 33.00 16.0 1.5 28 1 0.07H690 EWN D25-5-MMT15-R04 25.00 4.00 5 25.00 23.90 T15 42.00 20.0 1.1 40 1 0.12%u2022 Insert clamping screw must be lubricated every indexing %u2022 For adaptation see page 9(1) Number of inserts (or edges for solid tool) (2) Clamping wrench size (3) Maximum ramping angle (4) Tool tightening torque (Nxm) (5) 0 - Without coolant supply, 1 - With coolant supply For inserts: H690 WNMU 0403 For holders, see pages: MM S-A (stepped shanks) (90) %u2022 MM S-A (straight shanks) (93) %u2022 MM S-A-AV (90) %u2022 MM S-A-BT (97) %u2022 MM S-A-C# (96) %u2022 MM S-A-HSK (96) %u2022 MM S-A-SK (96) %u2022 MM S-B (85%u00b0 conical shanks) (93) %u2022 MM S-D (89%u00b0 conical shanks) (94) %u2022 MM S-ER (95) %u2022 MM S-ER-H (95) %u2022 MM TS-A (92) %u2022 MM TS2-A (90)Spare PartsDesignationH690 EWN-MM-04 SR M2.5X6-T7-60 T-7/51H690 EWN-MM-0490%u00b0 Endmills with a MULTI-MASTER Threaded Connection Carrying H690 WNMU 0403 DoubleSided Trigonal InsertsDCAPMXLFDCONMSOALDRVS3%u00b0THSZMSRd%u00b0Designation DC(1) APMX CICT(2) LF OAL RMPX%u00b0(3) THSZMS DCONMS DRVS(4) MIID(5) CSP(6) kgE93CN D16-2-MMT10-07 16.00 5.00 2 27.00 38.64 4.0 T10 15.00 13.0 CNHT 070315 0 0.03 SR 34-505/LHG T-8/53E93CN D20-3-MMT12-07 20.00 5.00 3 27.00 40.36 3.0 T12 19.00 16.0 CNHT 070315 0 0.05 SR 34-505/LHG T-8/53%u2022 Do not apply lubricant to the MULTI-MASTER threaded connection %u2022 For adaptation options, see page 9(1) The specified diameter is for inserts with a 1.0 mm radius. For other radii options, see diameter change in the table below (2) Number of inserts (or edges for solid tool) (3) Maximum ramping angle (4) Clamping wrench size (5) Master insert identification (6) 0 - Without coolant supply, 1 - With coolant supply For inserts: CNHT/MT 07 For holders, see pages: MM S-A (stepped shanks) (90) %u2022 MM S-A (straight shanks) (93) %u2022 MM S-A-AV (90) %u2022 MM S-A-BT (97) %u2022 MM S-A-C# (96) %u2022 MM S-A-HSK (96) %u2022 MM S-A-N (92) %u2022 MM S-A-SK (96) %u2022 MM S-B (85%u00b0 conical shanks) (93) %u2022 MM S-D (89%u00b0 conical shanks) (94) %u2022 MM S-ER (95) %u2022 MM S-ER-H (95) %u2022 MM TS-A (92) %u2022 MM TS2-A (90)Diameter Change According to Insert RadiusR 0.5 1.0 1.5%u2206D +0.07 0.0 -0.07E93CN-MM-07Bull Nose Endmills with MULTI-MASTER Threaded Adaptation Carrying Toroidal Inserts