Highlights

The new QCP-2M drilling heads are available in 8.0 to 25.9 mm diameters, in 0.1 mm increments.
These new drilling heads ensure a hole tolerance of IT8 and can be mounted on any SUMOCHAM standard drill body with the appropriate pocket size.
The QCP geometry should be regarded as an improved version of the previous generation SUMOCHAM double margin inserts (ICP-2M).

Features
The new improved design of the insert’s geometry features improved self-centering capabilities when compared to the current ICP-2M inserts, by gaining better hole straightness, roundness and surface finish.



The ICP-2M inserts will be phased out by the end of 2017.


• Can provide high surface finish of up to 1.6 Ra hole cylindricity and straightness of up to 0.05 mm




• Can provide high surface finish of up to 1.6 Ra hole cylindricity and straightness of up to 0.05 mm




• Can provide high surface finish of up to 1.6 Ra hole cylindricity and straightness of up to 0.05 mm




• Can provide high surface finish of up to 1.6 Ra hole cylindricity and straightness of up to 0.05 mm



Recommended Machining Conditions
█   Recommended cutting data
     The data refers to IC908