| |
 |
| |
 
Toolhoders
Preset screws in all sizes to adjust the required length for fixed position 10 mm (3/8) range.
Special high alloy H13 steel with high thermal shock resistance over 500°C (930°F).
Toolholder life exceeds 5000 mounting cycles
Toolholders 6-32 mm (1/4 - 1-1/4") Diameter Range HSK A 63, 100, DIN69871 40, 50, BT40, 50, CAT40, 50
Features:
High accuracy runout OD-ID 0.003 mm (.00012")
Powerful clamping with high friction force.
High stiffness due to one solid piece.
Symetrical, balanced design for high speed G2.5, 25,000 RPM.
(An optional balancing correction may be accomplished by 4 threaded
holes in the nose circumference).
Prolonged tool life due to its low heating temperature and better
rigidity, accuracy and stiffness.
Slim design with a 4.5° nose angle, according to DIN69882-8
standard.
The new INTEGRAL SRKIN holders are designed for tools in the diameter range of 6-32 mm (1/4 - 1 1/4) for heavy milling operations. The ER
SRK are intended for high speed machining using tools in the 3-12 mm (1/8 - 1/2) diameter range on a standard collet chuck, or milling heads on turning centers. They are available with 3 different length projections: 35, 60 and 85 mm (1.5, 2.5 and 3.5").
Heating Units:
1. For the ER
SRK we will continue to offer our compact unit:
SHRINKIN UNIT - EUR / SHRINKIN UNIT - USA.
2. For the INTEGRAL SRKIN there is an induction thermal unit with quick insertion and release (less than 5 sec).
It is available in the range of 3-32 mm (1/8-1 1/4).
|
|